Improvements since version 6.0.5:

IMPORTANT NOTE: This version of infra CONVERT requires at least version 3 of the license service. The required license service is automatically installed or updated during installation via infra_CONVERT-Setup.exe. 
For network installations, ensure that at least version 3 of the license service is also installed on the central license server. If necessary, the license service on the license server must be updated before this version of infra CONVERT is put into operation. Please check the version of the license service on the license server and perform an update if necessary to ensure trouble-free operation.

General bug fixes and stability improvements.

Additional improvements address specific requirements of individual customers.

Improvements since version 5.3.4:

AI Text Recognition: AI-powered text recognition that runs entirely locally on your computer - without any connection to external servers. Your documents and content remain secure and exclusively on your device at all times.
Text can be extracted from any document - regardless of format. The software supports both raster formats such as PNG and TIFF, as well as PDF documents without embedded text content. The AI text recognition identifies and extracts existing text so that it can be extracted and processed further.

Update of Characteristic value: When the characteristic value is edited, the text is evaluated again and the properties are reassigned.

Offline User Manual: The user manual is installed together with infra CONVERT as a pdf document.

Automatic fit selection into view: Selection in the characteristic list changes the document view immediately. Can be deactivated with a button above the list view.

Additional improvements address specific requirements of individual customers.

Improvements since version 5.2.4:

PDF Import (Pro): Support for importing transparent text. Additionally, unusable fonts within PDF documents are now detected and no longer used to prevent display errors.

PDF Export: Correction of color display errors and resolution of an issue that caused some characters to be missing in the exported PDF.

STEP Import: The functionality for importing STEP models has been significantly expanded to enable even more detailed data transfer.

Measurements: Manually stamped dimensions are now permanently saved in the document and are therefore available even after the file is reopened.

Annotations: A bug related to reordering annotations has been fixed, ensuring that the order is now maintained consistently.

Exports: Fixed a potential crash when exporting oversized drawing graphics.

Additional improvements address specific requirements of individual customers.

Improvements since version 5.1.7:

Custom stamp shapes introduced: Stamp templates can now use custom stamp shapes.

Improved recognition of drawing elements: Automatic recognition has been expanded and text recognition optimized.

Improved STEP and PDF import: The import of inch drawings has been corrected. In addition, the functionality of the STEP import has been expanded.

Further improvements relate to the specific requirements of individual customers.

Improvements since version 5.1.5:

Optimization when positioning freely inserted stamps.

Optimization when numbering stamps.

Further improvements relate to the specific requirements of individual customers.

Improvements since version 5.0.7:

STEP import optimized: The import process has been improved; in addition, several display issues have been fixed and characteristic recognition has been expanded. The default lighting has been revised and now ensures a more consistent display. The alignment of the stamp views has also been optimized.

PDF raster import improved: PDF import has been further optimized.

PDF export – improved text searchability: Where possible, text is now searchable and copyable.

Opening of read-only project files corrected: An error that prevented opening has been fixed.

Exports now use the actual document name: Previously, there were discrepancies; file extensions were sometimes truncated in the name. This behavior has been corrected.

Improved characteristic recognition: Characteristic recognition has been further refined and now works more reliably.

Project settings can be updated when opening via startup parameters: Markings, classes, categories, and stamp templates can now be updated automatically.

Elements on hidden layers are no longer stamped: The stamp logic now reliably ignores hidden content.

Measurement in inch drawings improved: The measurement functions now deliver more reliable results, taking scaling factors into account.

Further improvements relate to the specific requirements of individual customers.

Improvements since version 4.9.8:

Import of STEP data: In addition to the previous import formats, STEP data can now also be imported, preferably in AP242 format.

Stamping on the 3D model: Stamping can now be carried out directly in the 3D CAD model (STEP-AP242 format with semantic PMI data).

Drawing comparison: In addition to the previous feature properties, the category is now also transferred.

User interface: Optimisation of the feature properties, revision of the toolbar and display of the licence information there.

Characteristics list: The columns in the characteristics list are now configurable.

Excel export: New Excel templates, the alternative Excel export has also been revised.

Measurement tool: Improved accuracy and usability. Extended evaluation and configuration options are also available.

DWG/DXF import: Import of files with multiple layouts optimised. Optionally, existing projects can be optimised when opened. This reduces the project file size and memory requirements.

Update project settings: The project settings (characteristic classes, stamp templates, tolerance table settings and tagging) can now be updated in existing projects from templates.


Further improvements relate to special requirements of individual customers.

• Logo and name of mdm TOOL were updated.
• Optionally, input devices can now be deactivated automatically. The following events can be set under Settings > Auto Disable Settings:
  
  • Time after last use.
  • Logging the user off the PC.
  • Locking the PC.

• Fixes an error that occurred when using the time delay parameter "<P:xxx>" in the output via the keyboard interface.

• A pause character has been added to the formatting options for data output.
• Improved usability of password protection settings.

• Fixed a bug with the frequency channel change in the infra DAT system.
• Fixed a bug that could cause the mdm TOOL service to hang during a version update.
• The link to the online manual refers to the manual for the product infra CONVERT. The link now points to the mdm TOOL manual.
• Overall stability has been improved.

• The settings can now be protected against editing with a password.
• Measured values can now be entered manually in the mdm TOOL user interface and output to connected devices on the output side.

• Fixes an error when starting the program for the first time after a new installation.

• Fixes a problem recognizing blue - DAT dongle after sleepmode.

• Fixes a problem recognizing blue - DAT dongle after sleepmode.

• New installer: french and spanish.
• The software is now available in: English, german, french and spanish.
• Support for the blue-DAT footswitch

• Fixes problems with virtual comport in combination with 32bit systems.
• Fixes a problem where MDM-Tool did not find blue-DAT receiver.

• Fixes problems with virtual comport in combination with native ports.

• Virtual keyboard now supports function keys. Use e.g. <F1> in format string.
• New updater

• Various bug fixes.

• New installer: English and german.
• The software is now available in: English, german, french and spanish.

• Various bug fixes.